Job Description

CARPENTER

Reports to: Reports to Superintendent

Responsibilities: Completed an apprenticeship and has obtained a full compliment of tools (per attached list) and knowledge of their use.

Functions:

• Wood construction A to Z.
• Install millwork.
• Scheduling of other trades.
• Knowledge of building codes.
• Use carpenter's square.
• Finish and trim work.
• Shoot, line and grade.
• Detailed formwork.
• Layout.
• Install jambs, doors and hardware.
• Read blueprints.
• Metal stud work and gypsum wall board.
• Will perform the above functions and other related duties.
• Have a general knowledge of other trades such as roofing, masonry, etc.
• Ensure that tools and equipment are properly cleaned, stores, and maintained for optimum performance and safety.

Requirements:

• Thorough understanding of the correct and safe operation of all related tools and equipment.

• All carpenters should have license for powder actuated tools.

• Work within precise standards of accuracy; rate information using standards which can be measured or checked; compare and see differences in the size, shape and form of lines, figures and objects; look at flat drawings or pictures and understand how they would look as solid objects.

• Excellent verbal and written communication skills.

• Follow oral and written directions, plans and blueprints.

• Completion of apprenticeship program required.

• Actively support; enforce Safety Policies.

Physical Requirements: Workers must be able to: see well (either naturally or with correction); coordinate the movements of eyes, hands and fingers; use hands, arms and fingers fully; climb and maintain balance on ladders and scaffolding; stoop, kneel, crouch, crawl, or work at heights as required; and list and carry objects weighing up to 50 pounds and occasionally more.

Education and experience: High School diploma or equivalent and completion of formal apprenticeship program or equivalent training and experience.

Suggested Tool List

(1) Carpenters tool box - capable of being locked

(1) Eight point cross cut saw

(1) Twelve point finish saw

(1) Hack saw

(1) 16" x 24" framing square

(1) 12" combination square or speed square

(1) Chalk line

(1) 16 oz. plumb bob

(1) 100' tape measure

(1) 16' tape measure

(1) 20 oz. hammer, framing hammer, finish hammer

(1) Set standard screw drivers

(1) Set Phillips head screw drivers

(1) Set wood drills 1/2" to 1"

(1) Set wood chisels

(1) Block plane

(1) Sheetrock scrub plane

(1) Set open end wrenches

(1) 16" flat bar

(1) 30" wrenching bar

(1) 30" level

(1) Set nail sets

(1) Stanley knife and blades

(1) Carpenters belt and apron

(1) Scribes and dividers

(1) Ariation snips - left and rights and all tools to be kept sharp and useable at all times.

(1) Cats paw

Power tools to be furnished by firm.

All carpenters should have license for powder actuated tools.

Job Tags

Similar Jobs